You are here

Tools

Displaying 36 product(s), page 1 of 4:

Grit 150, Shank 3mm (1/8”)

Assorted Diamond Points Ideal for Craft, Modelling, Home Repair, Use On Ceramics Tile, Glass, Plastics, Fibreglass, Carbon Fibre, Stone, and Wood.

Keep out of the hands of children.

Ideal for cutting carbon fibre Rod, Tube, Strip etc.

Contents:

  • Mandrel size 3.1mm 1 off
  • Disc diameter 22mm 36 off
  • Screw and washer 1 of each

Max RPM 28000

Work with any power drill.

  • Arbor size 1/8"with washer and screw 2 off
  • Diamond Coated Disc diameter 20mm 4 off
  • Diamond Coated Disc diameter 22mm 2 off

The faster the drill the better the wheel cuts.

Works with any power drill.

  • Arbor size 1/8"with washer and screw 1 off
  • Diamond Coated Disc on both sides, diameter 50mm (2inch) 1 off

Keep free from dirt and solvents for long life and trouble free use.

The faster the drill the better the wheel cuts.

  • 3.1mm drum mandrel
  • 14.5mm drum outside diameter 
  • 6 Sanding drums
  • Max 28,000rpm

WARNINGS:

  • Never touch the drum while it is spinning.
  • Keep out of the hands of children.

Sanding pad

Size 4” x 5”

400 grade grit

Double sided with a soft foam core.

Ideal for sanding cured resin and hardener on wing and fuselage panels, also great for sanding foam panels.

When used with Epoxy Resin and Hardener then the brush can be cleaned with IPA or Epoxy Thinners.

When used with Polyester Resin then the brush can be cleaned with Pure Acetone.

Available as single brushes, or in bulk packs.

When used with Epoxy Resin and Hardener then the brush can be cleaned with IPA or Epoxy Thinners.

When used with Polyester Resin then the brush can be cleaned with Pure Acetone.

Available as single brushes, or in bulk packs.

 

When used with Epoxy Resin and Hardener then the brush can be cleaned with IPA or Epoxy Thinners.

When used with Polyester Resin then the brush can be cleaned with Pure Acetone.

Available as single brushes, or in bulk packs.

Good for wetting out fibres in difficult areas like down inside model aircraft or glider fuselages.

When used with Epoxy Resin and Hardener then the brush can be cleaned with IPA or Epoxy Thinners.

When used with Polyester Resin then the brush can be cleaned with Pure Acetone.

Pages

© Copyright Bucks-Composites, all rights reserved.

Subscribe to Tools