Heat deflection temperature: 120 °C
Carbon fibre sheets are made out of HT carbon fibre prepregs with a transparent epoxy resin matrix in press moulding. The edges of the plates are "rough sawn".
One surface layers consists consist of 3k-fabric style 452 in twill weave 2/2 (fabric prepreg CE 8201-200-45). Depending on sheet thickness the core layer consists of 3k-fabric and/or UD-non-crimp fabric 0°/90° (bidirectional).
Carbon fibre sheets can be milled, sawn or cut by water jet. Please make sure to pre-drill the CFRP plates at the puncture site of the water jet.
Tolerances length and width:
Sawn: ± 1 mm
Cut by water jet (depending on the free capacity of the facilities): ± 0.3 mm
Tolerances thickness:
1 mm and 1.5 mm: ± 0.2 mm
2 mm: ± 0.3 mm