Model foam wing building

An alternative to copydex for adhering balsa wood sheeting to foam model aircraft or glider wings.

Using the easy to use Bucks Single-Part coating system with no mixing required and brushes and tools can be washed in warm soapy water.

Bucks Single-Part has a very long working time and 24 hour cure time.

Model aircraft wings can be designed by you then www.foamwings.co.uk can cut and supply your wing cores.

Cut the balsa sheet to size or tack the balsa sheets together with cyano glue to the required sizes.

Coat the four surfaces of the balsa sheeting and the foam which needs to be bonding together.

Replace the foam cores and balsa sheet back into there foam shells and check for alignment then weight down with weights.

Now leave to cure which takes about 24 hours.