You are here

New Products

Here are the latest products we've added to the Bucks-Composites online shop:

Low viscosity.

Easy measuring ratio.

Mix ratio by Volume:-

        100 parts Resin to 50 parts Hardener (2 to 1)

Low viscosity.

Easy measuring ratio.

Mix ratio by Volume:-

        100 parts Resin to 50 parts Hardener (2 to 1)

Supplied with:-

  • 60ml graduated mixing pots qty 2
  • Spatulas qty 2

Notes:

Note: These are not suitable for silicon casting compounds or Single-Part coating products and only for Bucks Formula Laminating & Casting Epoxy Resins.

Premium Masking Tape is designed to combine consistent unwinding, easy tear and conformability, performing extremely well when used tape on tape and with masking paper and protective film.

Aluminium powder

Fine, powdery aluminium powder as an additive for pouring and moulding compounds.

Recycled carbon fibres* from rovings (100 % Carbon).

Ideal for reinforcing, Balsa wood, Spars, etc.

Good for hand lay-ups, winding, fast and good impregnation for epoxy, polyester, vinyl ester resins or Cyano (super glue).

Impressively light & rigid when impregnated with one of the above.

Ideal for reinforcing, Balsa wood, Spars, etc.

Good for hand lay-ups, winding, fast and good impregnation for epoxy, polyester, vinyl ester resins or Cyano (super glue).

Impressively light & rigid when impregnated with one of the above.

Tough and high strength,

Plain weave,

Carbon Fibre & Aramid Kevlar® warp & Aramid Kevlar® weft.

Carbon 4,120 MPa

Aramid 3036 MPa

These Carbon Fibre & Epoxy Resin Tubes are made of uni-directional carbon fibre with an additional spirally wound layer for optimum strength and are called pullwound tubes.

Pages

© Copyright Bucks-Composites, all rights reserved.

Subscribe to New Products