Pultruded carbon-fibre rods are made from resin & carbon fibres are drawn continuously through a die. This production method causes the fibres to be oriented unidirectionally, i.e. along the length of the pultruded form.
We do recommend to roughen up the bonding surfaces then use epoxy resin or cyanacrylate (superglue) for the bonding itself.
A range of carbon fibre rods, 1 metre long, in a selection of diameters from 0.28mm to 12mm outside diameter. Please see the cutting tools under tools for cutting the carbon fibre rods.
All dimensions are nominal sizes (die sizes)