Photo of my B24 model that my father flew in the far east during WW2 KH331 Winimae, used your lightweight cloth all over and has come out ,really well . Dave Martin
The ASW 24 Special has the wings, tail & rudder covered with Bucks-Composites materials super lightweight glass cloth and epoxy resin and hardener. This has a Lady pilot and is fly by wire.
Here is a electric foam model purchased from Rapid RC Models (rapidrcmodels.com) and covered with Bucks-Composites modern building materials. Please see the 'How To Do' for more information. This technique is strong but quite messy to apply.
Highlight electric glider, inside the fuselage cutaway canopy area is reinforced with Bucks-Composites materials strong Aramid / Kevlar® reinforcing tape and wetted out with epoxy laminating resin and hardener which will withstand a few heavy landi
The Spitfire is a Balsacraft kit, flown as electric and has been fully glassed using the Bucks-Composites materials system. The Spitfire has a brushless motor and Li-Po battery pack and flies very well from a flat field. Part of the BOB memorial flight.
See my Tony Nijhuis Hurricane. Glass on the wings and front fuselage by Bucks-Composites. First time I’ve ever used the technique. Delighted with the outcome. Model should fly in the spring!
The Easy street plane is built from a kit and is fully glassed using Bucks-Composites materials system. This plane can be flown as a pss or as electric.
The FW 190 is fully glassed using the Bucks-Composites materials system. The FW 190 is a Balsacraft kit. The FW 190 can be flown as a PSS or flown as a electric model.
The Lancaster has four electric motors and fully glassed using Bucks-Composites materials system. This is a Priory models kit and flies very well. Part of the BOB memorial flight.
This special plane has a brushless motor, built from a plan and covered with the Bucks-Composites materials system. The plane has 25g glass fibre woven cloth and epoxy resin and hardener on the wings, fuselage, twin booms and tail.
Attached photo of Lyric 2 metre Soarer using your Bucks-Composites products for moulded fuselage and wing skinning. Second place in national league 2011.