Model planes

Displaying 18 product(s):

109 & 163 I am sending some photos of 2 models covered in your glass fibre cloth. The 109 was fully covered in cloth and the 163 had the wing, elevons & fin glass clothed. The fuselage is plastic. Read more about 109 & 163	B17G B17G, 10ft span, 30lb built from plans and entirely covered with Bucks-Composites materials ultra lightweight glass fibre cloth and Epoxy resin and Hardener. Read more about B17G
Boulton Paul P-120 I am a fan of Bucks-Composites. Enclosed are some glassing photos of my Boulton Paul P-120 mock up. This one will fly with a prop up front and a tuned pipe in the fuselage. The real model (same size) will have a turbine installed. Read more about Boulton Paul P-120	Chipmunk 1/3 scale Chipmunk 1/3 scale 11ft 4in span, fus, fin, tailplane & cowl all glassed with Bucks-Composites materials Engine Quadra 75 model weighs 22Kg. Read more about Chipmunk 1/3 scale
GB's Micro-Mould Planet My first radio controlled attempt at flying with a Micro-Mould Planet which had an Enya engine fitted. We gave it a hand launch which climbed to about 30 feet then the wrong human input to the radio caused the plane to nosedive straight into the ground. That was the end of the plane. Read more about GB's Micro-Mould Planet	Mitchell B25 This is one of Colin's planes that has used Bucks-Composites materials to cover the model. The wingspan is 120" and length is 94". Read more about Mitchell B25
New cowl made A new cowl was made for the Ryan PT22 from Bucks-Composites materials woven glass cloth and epoxy resin. Read more about New cowl made	Paul's Tempest Tempest scale 1-4.5 span 110" engine Moki 250 5 cylinder, weight 38lbs, built from scratch no plans. Bucks-Composites materials used to Glass cover, mould a cowl, spinner and U/C doors. Read more about Paul's Tempest
Planes Here are a few planes that has made use of Bucks-Composites materials. Read more about Planes	Supermarine Swift Supermarine Swift - 55 pounds gross, Cobra 30 pounds S.T. gas turbine. The photos are self-explanatory. The plug of pink foam was glassed with 2x200 Twill and 1x135 cloth and was split. The foam was carved out then washed out with cellulose thinner. When finished flew very well. Read more about Supermarine Swift
The B17 The B17 Fully glassed using Bucks-Composites materials system, the wingspan is 10 ft. Read more about The B17	The B25 Mitchell The B25 Mitchell Fully glassed using Bucks-Composites materials system, the wingspan is 10 ft. Read more about The B25 Mitchell
The Gloster Whittle The Gloster E28/39 ‘Whittle' has Bucks-Composites materials used on Fuselage and on parts of the wing. The wing span is 116” and has a length of 101” and weighs 40 lbs. Read more about The Gloster Whittle	The Hercules The Hercules Fully glassed using Bucks-Composites materials system, the wingspan is 12 ft. Read more about The Hercules
The Jet Provost The Jet Provost is fully glassed using Bucks-Composites materials system Read more about The Jet Provost	The Lancaster The Lancaster Fully glassed using Bucks-Composites materials system, the wingspan is 17 ft. Read more about The Lancaster
Turbo Raven Turbo Raven - although petrol powered! Finished in Bucks-Composites materials glass cloth and resin. Span is 96", power is a Moki 75cc and weight is about 32 lbs. Read more about Turbo Raven	Warbirds by tjd Here are just a few model aircraft that have all been covered with the Bucks-Composites materials covering system. Read more about Warbirds by tjd