Fine, powdery aluminium powder as an additive for pouring and moulding compounds.
Processing:
The aluminium powder is added as soon as the resin-hardener compound is ready for processing. Gradually increase quantity until the desired consistency is achieved (from flowable to kneadable possible). Any quantity can be added.
Non-drip mixtures are obtained when the filling level is raised or a thixotropy-enhancing agent is also added.
Technical data:
Particle size: > 63 µm
Density: 2.7 g/cm³
Melting point: 660 °C
1kg pot.
© Copyright Bucks-Composites, all rights reserved.