You are here

Bucks 2 inch Resin Foam Roller Kit

Use the Bucks 2 inch roller for applying activated epoxy resin and hardener to lightweight glass fibre woven cloth on model planes.

The 2 inch roller is good for most size of models.

Rollers cannot be cleaned after use if used with activated epoxy resin.

Rollers can be cleaned with warm soapy water if used with Single-Part coating System.

The tray can be re-used if cleaned straight after use with absorbent paper

Note: We recommend the use of rollers for applying activated epoxy resin to Super or Ultra lightweight woven glass fibre cloth on model aircraft wings and fuselage to prevent dragging the glass fibre cloth. Depending on the quantity of the activated epoxy resin applied to glass fibre woven cloth with a roller, may need the surplus activated resin removed with absorbent paper (toilet tissue roll) to save weight of the model. In the pre-cured state of the activated resin the absorbent paper does not stick and can be peeled away from the model easily before the curing process. Remember surplus resin is only going to add weight to the model so must be removed and only leave enough of the activated epoxy resin to stick the woven glass fibre cloth to the model.

Not recommended for use on heavier weights of glass fibre woven cloths.

Please select size of the kit from the menu below.

Packed weight: 
170 g
£4.30

© Copyright Bucks-Composites, all rights reserved.