You are here

Bucks 2 metre Single-Part Coating Kit for model Boats & model Planes

Not fuel proof.

Pack includes:

  • One pack of the 25g 2 metre long x 950mm wide Ultra Lightweigh Glass Fibre Woven Cloth.
    One pack of the 48g 2 metre long x 1 metre wide Super Lightweight Glass Fibre Woven Cloth.
  • 250ml of Bucks Single-Part Coating System (Gloss or Semi-Matt Finish).
  • 1 Bucks Synthetic Coating Brush 1"
  • 2 coating Squeegee applicator card.
  • 1 60ml Pot.
  • 1 pair of Surgical Gloves.
  • Instructions.
  • Brushes and Tools can be washed off in warm soapy water.
  • Avoid contact with eyes and skin, wear suitable gloves and eye protection.
  • Suitable for use with lightweight glass cloth for covering model boats & model aircraft.
  • Single-part and doesn’t attack foams white, pink or blue.
  • Foam Friendly, single-part no mixing required, dries hard & clear.
  • Self Levelling Properties and very long working time.
  • Not fuel proof.
  • Not as strong as Epoxy Resin coating.
  • Makes a good base layer with glass fibre woven cloth for painting foam models.
  • Acrylic paint ok.
  • Cellulose paint not suitable.
  • Waterproof.
  • Full strength can be over 8 weeks.
  • Low Odour & easy to use.

Shake bottle before use.

When covering a foam surface, sand the foam smooth then cut the glass fibre woven cloth to size and lay on the foam surface. Now wet out the cloth with the Bucks Single-Part coating system with a coating brush or a roller then leave for 2 hours to dry before applying another coat. Repeat the process until the required finish is achieved.

Please select glass fibre woven cloth weights: 25g (950mm wide) or 48g (1 metre wide) & finish from the menu below.


This kit contains the following free of charge a brush, 2 spreader cards & a pair of surgical gloves. 

Packed weight: 
465 g

© Copyright Bucks-Composites, all rights reserved.