You are here

Bucks Formula 50 Epoxy Resin & Hardener 150ml kit

This kit is the same as the Wing joining / repair kit for model planes but without the glass fibre tape & brush.

The kit contains:

  • Laminating Epoxy Resin and Hardener 150ml,
  • one epoxy resin spreader card,
  • two 25ml graduated mixing pots,
  • two spatulas
  • 1 Pair of surgical gloves
  • a set of instructions on how to do a surface repair.

This kit is very useful for surface repairs. Once the resin and hardener is mixed then put into a tray (larger area) to prevent heat build up, this will give you a longer pot life / working time (50 minutes). The cure time is 24 hours at room temp.

The Resin and Hardener is also Foam Friendly.

See our Formula 50 Epoxy Repair kit instructions for instructions and images of the process.

Packed weight: 
240 g

© Copyright Bucks-Composites, all rights reserved.