You are here

Bucks Quick Release Agent

Apply the Quick Release Agent to the clean or new mould with a cloth or brush and leave to dry which can take up to 45 minutes depending on the temperature before laying up on the mould.

This product is water based and environmentally friendly.

Always apply a coat of Quick Release Agent to the mould for every moulding taken.

Traces of Quick Release Agent can be easily removed from the moulded item with a rag wetted with Acetone.

The Bucks Quick Release Agent works with Polyester or Epoxy resins.

0.25 litres

© Copyright Bucks-Composites, all rights reserved.