You are here

Carbon Fibre Pultruded Solid Rectangular Strip, 1 metre Long.

Pultruded carbon-fibre rods from HT carbon fibres (Torayca® T300 or equivalent) and epoxy resin are drawn continuously through a die. This production method causes the fibres to be oriented unidirectionally, i.e. along the length of the pultruded form. The result is a high fibre volume fraction of 62 % with a very low air voids content.

A pre-treatment of the adherent is not nescessary. We do recommend to use epoxy resin or cyanacrylate (superglue) for the bonding itself.

A range of carbon fibre strip 1 metre long, in a selection of sizes from 3mm width to 20mm width. Please see the cutting tools under tools for cutting the carbon fibre strips.

All dimensions are nominal sizes (die sizes)

 

 

Resin used: 
Epoxy
Width: 
3.00 mm
Thickness: 
0.13 mm
Weight: 
0.53 g (approx.)
Length: 
1.00 m
£2.50

© Copyright Bucks-Composites, all rights reserved.